Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] EV-100 on a powerboat?
12-03-18, 09:00 AM
Post: #4
RE: [CA11] EV-100 on a powerboat?
aequitas1916,

You may want to give the support team at SeaStar a call to verify the cubic capacity. If it is indeed 7.2 cu. in., then a Type 1 Hydraulic Pump would be required. The Type 1 Hydraulic Pump should not be used with an ACU-100. If the vessel features a 12V power distribution system, the Type 1 Pump may be interfaced to either an ACU-150 (T70330 EV-150 Hydraulic Pilot) or an ACU-200 (T70157 EV-200 Hydraulic Pilot). If the vessel features 24V power distribution system, then an ACU-200 must be installed.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] EV-100 on a powerboat? - Chuck - Raymarine - Moderator - 12-03-18 09:00 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)