Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Compatibility between DSM300 and new MFDs
04-27-16, 03:36 PM
Post: #1
Compatibility between DSM300 and new MFDs
Hello,

We have a costumer with a DSM 300 Sonar module, is it compatible with the new MFDs? Can I connect it to a Seatalk HS network and operate it from de FishFinder application of the MFD?

Thanks in advance,

Regards,

Martin
Find all posts by this user
Quote this message in a reply
04-27-16, 03:51 PM
Post: #2
RE: Compatibility between DSM300 and new MFDs
Welcome to the Raymarine Forum Martin,

The DSM30/300 sounder modules are indeed compatible with the a/c/e/eS/gS-Series MFDs. If an a/c/e/eS/gS-Series MFD will be replacing one of the following MFDs, then the currently installed SeaTalkHS cable may be adapted with an A80160 SeaTalkHS (F) to RayNet (F) Adapter:
- E-Series Classic MFD
- C-Series Widescreen MFD
- E-Series Widescreen MFD

Otherwise the DSM may be interfaced to an a/c/e/eS/gS-Series MFD via an assembly constructed from an A80272 SeaTalkHS (M) to RayNet (M) Adapter and an appropriate length of RayNet (F) to RayNet (F) Cable.
Find all posts by this user
Quote this message in a reply
05-12-16, 03:32 PM
Post: #3
RE: Compatibility between DSM300 and new MFDs
Hello Chuck,

Ok, it is clear now. Thanks for your answer.

best regards,

Martin
Find all posts by this user
Quote this message in a reply
05-13-16, 09:37 AM
Post: #4
RE: Compatibility between DSM300 and new MFDs
You're welcome.
Find all posts by this user
Quote this message in a reply
06-05-16, 09:22 PM (This post was last modified: 06-06-16 10:36 AM by Chuck - Raymarine - Moderator.)
Post: #5
RE: Compatibility between DSM300 and new MFDs
So im replacing my c120 with a c127. I have a DSM30/300. would I need part number e66066 ore66074
Find all posts by this user
Quote this message in a reply
06-06-16, 10:40 AM
Post: #6
RE: Compatibility between DSM300 and new MFDs
Martin,

If connecting the transducer directly to the MFD's transducer socket, then the transducer would be unplugged from the DSM300. The transducer's plug would then be connected to an E66066 Transducer Adapter Cable. The other end of the Transducer Adapter Cable will be plugged into the MFD's transducer socket.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)