Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] Cannot control autopilot from eS97
11-01-18, 02:15 PM (This post was last modified: 11-01-18 02:19 PM by Chuck - Raymarine - Moderator.)
Post: #1
[DG11] Cannot control autopilot from eS97
I have a raymarine autopilot with a P70S in the stking network.
I cannot activate or control the autopilot on my eS97 with lighthouse 3
Find all posts by this user
Quote this message in a reply
11-06-18, 05:56 AM
Post: #2
RE: [DG11] Cannot control autopilot from eS97
Dear Sir,
Thank you for your enquiry

You have indicated that you have a p70s control unit for your autopilot, but what Autopilot computer are you using? Is it an Evolution Autopilot or SPX series?

The Evolution Autopilot is controllable from an LH3 enabled eS97, but if the autopilot uses an SPXseries computer, then the LH3 software will not be able to control it.

For further information, please refer to this update

regards
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)