Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ST70 multifunction instrument display won't sync with ST60+ AWI
11-10-18, 09:22 PM (This post was last modified: 11-13-18 02:54 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] ST70 multifunction instrument display won't sync with ST60+ AWI
ST70 is on a STNG network. St60+ is plugged into the STNG network with a seatalk adapter. Wind angle on AWI is correct but display on ST70 is 180 degrees off. By manually compensating the ST70 I can only get within 90 degrees of the AWI.

How do I get both instruments to display the same information?
Find all posts by this user
Quote this message in a reply
11-14-18, 03:22 PM
Post: #2
RE: [CA11] ST70 multifunction instrument display won't sync with ST60+ AWI
Welcome to the Raymarine Forum Paul,

Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)