Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Replacement for b744
11-18-18, 12:00 AM (This post was last modified: 11-19-18 11:58 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Replacement for b744
Is there a direct replacenent for a B744 through hull transducer....for an Axiom 9 “all in one” equivalent. 2” diamater...without resizing the [censored]? Old unit A65 and DSM25
Find all posts by this user
Quote this message in a reply
11-19-18, 12:03 PM
Post: #2
RE: [CA11] Replacement for b744
Welcome to the Raymarine Forum Skagit22,

If seeking to replace the currently installed B744V transducer, then it would be recommended that the A66091 version of the B744V be installed onboard the vessel. While Axiom MFDs do not feature internal fishfinder processing ciruitry, Axiom DV, Axiom RV MFDs, and Axiom Pro RVX MFDs do have internal fishfinder processing circuitry and each may be adapted for use with the stated version of the B744V transducer.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)