Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ST-STng wiring: power and p70 connections
04-29-16, 02:17 PM
Post: #1
ST-STng wiring: power and p70 connections
I am installing an EV-100 (on the dining room table at the moment, but later in a boat).

1) It would be convenient to wire the red power supply line to the ST-STng converter hub and let it supply power through the bus to the other components. I have a 1m backbone cable between the ST-STng converter hub and STng hub. The rest of the ng network is as supplied with the EV-100.

Is this OK?

2) Can I plug the p70 into one one of the white sockets on the ST-STng converter or does it have to be plugged into the STng hub?

Again, it simplifies my wiring if I can do this.

Thx. Don.
Find all posts by this user
Quote this message in a reply
04-29-16, 02:20 PM
Post: #2
RE: ST-STng wiring: power and p70 connections
Welcome to the Raymarine Forum Don,

Q1) It would be convenient to wire the red power supply line to the ST-STng converter hub and let it supply power through the bus to the other components. I have a 1m backbone cable between the ST-STng converter hub and STng hub. The rest of the ng network is as supplied with the EV-100.

Is this OK?

A1. Yes.

Q2) Can I plug the p70 into one one of the white sockets on the ST-STng converter or does it have to be plugged into the STng hub?

A2. Yes.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)