[CA] [CA11] Replacing Fluxgate compass
|
11-29-18, 12:46 PM
(This post was last modified: 11-29-18 01:24 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[CA11] Replacing Fluxgate compass
Can I replace the failed Autohelm/Raymarine M81190 fluxgate compass with a Digital Yacht HSC100 fluxgate compass. The HSC100 is NMEA 0183. Do I wire the HSC100 into the Type 100/300 AP or into the ImuxST multiplexor? Many Thanks.
|
|||
11-29-18, 01:23 PM
(This post was last modified: 11-29-18 01:24 PM by Chuck - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
RE: [CA11] Replacing Fluxgate compass
Welcome to the Raymarine Forum Ray,
Unlike later autopilot course computer designs, the Type 100/300 autopilot course computers were not designed to accept heading data from a NMEA 0183 source. While the HDG NMEA 0183 data sentences is listed among the supported input sentences, the Type 100/300 autopilot course computer was only extracting variation from this NMEA 0183 sentence. Accordingly, this course computer must be used with the M81190 Fluxgate Compass. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)