Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Replacing Fluxgate compass
11-29-18, 12:46 PM (This post was last modified: 11-29-18 01:24 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Replacing Fluxgate compass
Can I replace the failed Autohelm/Raymarine M81190 fluxgate compass with a Digital Yacht HSC100 fluxgate compass. The HSC100 is NMEA 0183. Do I wire the HSC100 into the Type 100/300 AP or into the ImuxST multiplexor? Many Thanks.
Find all posts by this user
Quote this message in a reply
11-29-18, 01:23 PM (This post was last modified: 11-29-18 01:24 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Replacing Fluxgate compass
Welcome to the Raymarine Forum Ray,

Unlike later autopilot course computer designs, the Type 100/300 autopilot course computers were not designed to accept heading data from a NMEA 0183 source. While the HDG NMEA 0183 data sentences is listed among the supported input sentences, the Type 100/300 autopilot course computer was only extracting variation from this NMEA 0183 sentence. Accordingly, this course computer must be used with the M81190 Fluxgate Compass.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)