European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
|
New boat installation Help
|
|
05-05-16, 02:51 PM
(This post was last modified: 05-09-16 08:27 AM by Steve - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
|
RE: New boat installation Help
Actually you will only need one ECI-100 and you will use the Volvo Engine Link cable (E70240), and connect directly to the Multilink Hub, if you don't have enough ports on the hub you would need the Engine Y Loom cable (E70241), you would disconnect one of the cables and Y the two cables in.
As for the diagram, other than the extra Seatalk NG backbone T and ECI-100, to connect the second engine, only one ECI-100 required. Lastly, what Ray VHF are you connecting to the Seatalk to Seatalk NG converter with yellow port, are you connecting to that for NMEA 0183? The a98 MFD does have NMEA 0183 on the power cable of the unit. |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
New boat installation Help - Jazevedo - 04-29-16, 07:55 PM
RE: New boat installation Help - Steve - Raymarine - Moderator - 05-05-16 02:51 PM
RE: New boat installation Help - Jazevedo - 05-07-16, 08:06 PM
RE: New boat installation Help - Steve - Raymarine - Moderator - 05-09-16, 08:39 AM
|
User(s) browsing this thread: 2 Guest(s)