Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Wheel locked in standby mode
12-04-18, 10:49 AM (This post was last modified: 12-04-18 01:09 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Wheel locked in standby mode
A dangerous situation happened twice this weekend. While cruising and without any warning the steering wheel locked. The auto pilot was in standby mode, I had to drop anchor to avoid crashing into the bank. This happened on Saturday and again the next day. I've had the unit; ACU400 mechanical drive; for several years without any problems whatsoever. But this is a serious situation. The wheel released on it's on after about a minute or two. Any advise please.
Find all posts by this user
Quote this message in a reply
12-04-18, 01:10 PM
Post: #2
RE: [CA11] Wheel locked in standby mode
Welcome to the Raymarine Forum dhiggins286,

The reported symptom is would indicate a problem with the clutch of the autopilot drive unit. It is accordingly recommended that the mechanical linear drive be sent to Raymarine’s Product Repair Center to be bench checked / serviced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)