Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ST60 and i60 on same system?
12-15-18, 10:41 AM (This post was last modified: 12-17-18 09:21 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] ST60 and i60 on same system?
I have a c95 MFD, ST60 tridata and would like to add an i60 wind instrument.
Will the i60 connect into the existing setup?
Find all posts by this user
Quote this message in a reply
12-17-18, 09:24 AM
Post: #2
RE: [CA11] ST60 and i60 on same system?
Welcome to the Raymarine Forum Whistonmarine,

Q1. Will the i60 Wind connect into the existing setup?
A1. Yes. Given some recent experiences with such configurations and intermittent support for True Wind, it would be recommended that the i60 Wind be daisy chained to the ST60 Tridata via an A06047 15.7in (0.4m) SeaTalkng Spur to SeaTalk Adapter Cable.
Find all posts by this user
Quote this message in a reply
12-17-18, 01:07 PM (This post was last modified: 12-17-18 01:27 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] ST60 and i60 on same system?
Sounds good, I’ll be a month or so until I can get the unit fitted, but I will fit it as suggested, thanks
Find all posts by this user
Quote this message in a reply
12-17-18, 01:28 PM
Post: #4
RE: [CA11] ST60 and i60 on same system?
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)