Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] E127 Touch screen function, not working properly
12-24-18, 03:46 PM (This post was last modified: 12-25-18 09:00 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] E127 Touch screen function, not working properly
Regardless of whether I am in chart mode or fish finder mode, my E127 has developed a problem with the touch screen capabilities. When I use the buttons, everything is fine but when I try to use the touch screen to activate the menu, all it does is close the screen I am on. I was going to try and reload the latest software update (R-19) and see if it fixed the problem, but thought I would try here first.
Thanks in advance,
Bill
Find all posts by this user
Quote this message in a reply
12-26-18, 08:51 AM
Post: #2
RE: [CA11] E127 Touch screen function, not working properly
Welcome to the Raymarine Forum Bill,

Please click here to view a FAQ addressing this subject. As indicated, it is recommended that one ensure that the MFD has been updated with the latest software as one of the initial steps in addressing this problem, in this case LightHouse II v19.03.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)