Raymarine forum / Raymarine Forums / Radar v / Radar -- no data source followed by operation

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Radar -- no data source followed by operation
05-20-16, 11:11 AM (This post was last modified: 05-25-16 03:47 PM by Chuck - Raymarine - Moderator.)
Post: #10
michaellutz Offline
Junior Member
**
 		Posts: 8
Joined: Feb 2016
Reputation: 0
RE: Radar -- no data source followed by operation
1) I have an ST60 suite of instruments along with the E-120. Everything works well except for this intermittent radar startup problem. Does this mean I have a Seatalk HS switch?

2) 3 years ago my original Raystar GPS antenna failed and I had it replaced and it works fine. BUT I was told at the time that the connection from the antenna to my system used Ethernet and that my system was now a "hybrid". Does this arrangement change what you told me above, namely that all I need to do is buy the new digital radome, update my E-120 software and connect the new digital cable to my Seatalk HS switch?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Radar -- no data source followed by operation - michaellutz - 05-20-16 11:11 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication