Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG] Thermal Camera
02-18-19, 09:37 AM
Post: #11
RE: [DG] Thermal Camera
Thank you.

I have my T-200 connected to a monitor and projecting images properly. The T-200 camera is connected to a PoE injector and then a LAN cable from it's PoE to the Network switch. I can connect my Windows 10 laptop to the network switch and bring up the web page for the T-200 and I can control the camera from my computer.

I connected a FLIR JCU-3 controller to my T-200 thermal camera. The JCU-3 is connected to a Raymarine PoE injector. I have a LAN cable connected from the PoE to the Network switch. I can bring up the web page on my computer for the JCU-3. I couldn't change the JCU-3 IP address to a static IP address and domain to match the T-200. However, I changed the IP address and domain on the camera to match the JCU-3. The JCU-3 stopped flashing, indicating pairing to the camera, but it can't control the T-200 from the JCU-3.

Is there something I need to do differently?

Terry
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG] Thermal Camera - tegarre - 01-09-19, 07:58 AM
RE: [DG] Thermal Camera - tegarre - 01-09-19, 09:21 PM
RE: [DG] Thermal Camera - tegarre - 02-05-19, 09:38 PM
RE: [DG] Thermal Camera - tegarre - 01-10-19, 08:09 AM
RE: [DG] Thermal Camera - tegarre - 01-19-19, 11:43 AM
RE: [DG] Thermal Camera - tegarre - 02-18-19 09:37 AM
RE: [DG] Thermal Camera - tegarre - 02-20-19, 10:36 AM
RE: [DG] Thermal Camera - tegarre - 03-04-19, 10:59 PM
RE: [DG] Thermal Camera - tegarre - 03-05-19, 08:52 PM
RE: [DG] Thermal Camera - tegarre - 03-10-19, 06:05 PM
RE: [DG] Thermal Camera - tegarre - 03-12-19, 07:53 AM
RE: [DG] Thermal Camera - tegarre - 06-09-19, 05:05 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)