Raymarine forum / Raymarine Forums / Fishfinders v / A128 Transducer Question

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
A128 Transducer Question
05-09-16, 10:07 AM
Post: #14
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: A128 Transducer Question
Scott,

Raymarine has not specified a minimum installation distance from other transducers. For thru-hulls installed on vessels equipped with twin screws, a transducer is commonly installed on each side of the keel. Interference noise between CHIRP and common 50/200 kHz fishfinder transducers installed on the same vessel is typically quite minimal.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
A128 Transducer Question - scottor - 05-02-16, 11:56 PM
RE: A128 Transducer Question - scottor - 05-03-16, 11:54 PM
RE: A128 Transducer Question - scottor - 05-06-16, 03:25 PM
RE: A128 Transducer Question - scottor - 05-06-16, 03:41 PM
RE: A128 Transducer Question - scottor - 05-06-16, 03:55 PM
RE: A128 Transducer Question - scottor - 05-07-16, 12:04 PM
RE: A128 Transducer Question - Chuck - Raymarine - Moderator - 05-09-16 10:07 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication