Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] P58 Transducer to a78 w/down vision
01-27-19, 05:32 PM (This post was last modified: 01-28-19 01:27 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] P58 Transducer to a78 w/down vision
I have 2 a78s plus a Simrad. Is there an adapter to connect a P58 Triducer to an a78 MFD w/downvision? I was hoping the units were compatible on the sonar side and just forego the downvision function. I could not find any adapter to connect the P58 to the a78. Maybe not possible, don’t know. Thanks.
Find all posts by this user
Quote this message in a reply
01-28-19, 01:33 PM
Post: #2
RE: [CA11] P58 Transducer to a78 w/down vision
Welcome to the Raymarine Forum bwconquest21,

Unfortunately, it is not possible to adapt any make/model of transducer to be interfaced to the Transducer socket of an ax8 MFD or eSx8 MFD. The transducer socket of these MFDs is exclusively designed to be interfaced to the DownVision and CPT-S Transducers found here.
Visit this user's website Find all posts by this user
Quote this message in a reply
01-28-19, 09:20 PM (This post was last modified: 01-29-19 08:57 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] P58 Transducer to a78 w/down vision
Chuck, as always thank you for your timely response!!!!!
Find all posts by this user
Quote this message in a reply
01-29-19, 08:57 AM
Post: #4
RE: [CA11] P58 Transducer to a78 w/down vision
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)