Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Adding one i70s to a two motor system
01-28-19, 06:12 PM (This post was last modified: 01-28-19 07:33 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Adding one i70s to a two motor system
EV-150, Axium 9, Ray53, and analog to N2k converter installed on a Seatalk NG network.

I want to replace a existing depth gage with a i70s and I’m wondering how one i70s works with two motors. Can both motors be displayed? (RPM, Fuel level, Voltage, Oil pressure) Is this the two motor overview? Have a example picture?

I know the Axium 9 will show me this information. I want to know what the i70s will do....

thanks
Find all posts by this user
Quote this message in a reply
01-29-19, 08:56 AM
Post: #2
RE: [CA11] Adding one i70s to a two motor system
Welcome back to the Raymarine Forum sr330da,

The i70/i70S MFIDs may indeed display engine data from more than one engine. Configuration settings within these MFIDs and MFDs permit the operator to select the number of engines. Please click here to view a FAQ addressing interfacing engine systems to a SeaTalkng / NMEA 2000 backbone to which Raymarine products have been interfaced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)