Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axion 7 software and function
01-29-19, 04:43 PM
Post: #2
RE: [CA11] Axion 7 software and function
Welcome to the Raymarine Forum lotteroseII,

Please click here to view a FAQ related to this subject. As indicated therein the SeaTalk to SeaTalkng Converter is supported for use with ST50+ instruments, but not with ST50 instruments. If your currently installed transducers are operational, then you may want to consider replacing the ST50 Tridata with an E70060 i50 Tridata instrument (display only). 1/8" female blade connectors may be added to the leads of the currently installed depth and speed/temp transducers to permit them to be used with the i50 Tridata instrument.

The i60 Wind instrument is dependent upon speed through water, not GPS SOG. Raymarine is considering introduction of sailing features into LightHouse 3 software which may be similar to those found within LightHouse II software. It is quite possible that these features may be included within a LightHouse 3 software update to be released during or shortly before the North American summer boating season.

Please click here more information concerning product and feature suggestions.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Axion 7 software and function - Chuck - Raymarine - Moderator - 01-29-19 04:43 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)