Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] acu 300 bypass output
02-03-19, 08:07 AM (This post was last modified: 02-04-19 08:16 AM by Derek - Raymarine - Moderator.)
Post: #1
[DG11] acu 300 bypass output
Solenoid (drive) bypass
Bypass connection - ACU-300. No info or voltage times In the manual.
Is this different from clutch output on 200 &/or 400 models which is clearly explained in the manual.

Is there a difference between a clutch output and a bypass output?

Can you let me know the volts and amps output of the bypass output on my 300 ?

Thanks

Ricky
Find all posts by this user
Quote this message in a reply
02-04-19, 08:20 AM
Post: #2
RE: [DG11] acu 300 bypass output
HI Ricky,

The output is identical to the clutch output on the ACU200 and ACU400, it is called bypass simply because on the ACU300 there would be no clutch connection.

Thanks
Derek
Find all posts by this user
Quote this message in a reply
02-04-19, 02:23 PM (This post was last modified: 02-04-19 02:32 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [DG11] acu 300 bypass output
Thanks Derek
Find all posts by this user
Quote this message in a reply
02-05-19, 09:39 AM
Post: #4
RE: [DG11] acu 300 bypass output
Hi Ricky,
You're welcome

Thanks
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)