Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
e120 classic
05-04-16, 01:28 PM
Post: #1
e120 classic
what would I need to connect a airmar gh2183 gps and heading sensor to my e120. the only other feed would be the radar. thanks , Jim
Find all posts by this user
Quote this message in a reply
05-04-16, 01:57 PM
Post: #2
RE: e120 classic
Welcome to the Raymarine Forum Jim,

It is recommended that the MFD and GH2183 each be interfaced as a spur to a powered and properly terminated SeaTalkng backbone. A simple backbone may be constructed from the following components:

- A06064 SeaTalkng 5-Way Connector
- A06031 SeaTalkng Termination Plugs x 2 ... one each to be installed within the blue backbone sockets of the SeaTalkng 5-Way Connector
- A06049 SeaTalkng Power Cable ... connects to switched 12VDC power circuit and to white spur socket of SeaTalkng 5-Way Connector
- A06061 / 4.92in (1.5m) SeaTalkng to E-Series Classic MFD Adapter ... connects between MFD's SeaTalk2/NMEA 2000 (SeaTalkng) socket and white spur socket of SeaTalkng 5-Way Connector
- A06075 / 39.4in (1.0m) DeviceNet Female to SeaTalkng Spur ... connects between GH2183's cable and white spur socket of SeaTalkng 5-Way Connector
Visit this user's website Find all posts by this user
Quote this message in a reply
05-05-16, 07:48 AM
Post: #3
RE: e120 classic
Chuck , thanks for the info. Parts are on order. If I have a problem i'll let you know . Thanks , Jim
Find all posts by this user
Quote this message in a reply
05-05-16, 09:55 AM
Post: #4
RE: e120 classic
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)