Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Q24c - need to track a target in order to get the vessel speed and bearings?
04-02-19, 03:28 PM (This post was last modified: 04-02-19 03:58 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Q24c - need to track a target in order to get the vessel speed and bearings?
Thanks in advance.

2 questions for Q24c Quantum radar:

(1) do i need to track a target in order to get the vessel speed and bearings? I thought I could just touch the target and it will show the speed and bearings of a target, but my test concluded otherwise.

So, my guess is I need to manually touch the menu in my Axiom MFD, and start tracking the target vessel in order to obtain the vessel's speed and bearings.

(2) Does the target vessel have to have AIS - automatic identification system (AIS) ?

http://www.youtube.com/njfishing1 - from Captain Steve
Find all posts by this user
Quote this message in a reply
04-02-19, 04:00 PM (This post was last modified: 04-02-19 04:01 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Q24c - need to track a target in order to get the vessel speed and bearings?
Welcome back to the Raymarine Forum ray18,

Q1. do i need to track a target in order to get the vessel speed and bearings?
A1. Yes.

Q2. (2) Does the target vessel have to have AIS - automatic identification system (AIS) ?
A2. Negative.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)