Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11) Interfacing AIS350 with Axiom 9
03-01-19, 03:48 PM
Post: #3
RE: [CA11) Interfacing AIS350 with Axiom 9
Ok. This is a bit confusing.
I have the SeaTalk power cable connected to power (the cable that runs from the Axiom Power NMEA/2000 plug to the power bus). All I want to do is connect the AIS350 into the system (into the Axiom). Are you saying I have to convert my system over to the SeaTalk/NMEA 200 components now just to make that connection? (I have the STng cable that goes into the AIS350 STng plug).
Fyi, the only components I need connected to the Axiom is a transducer and AIS350.
Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
RE: [CA11) Interfacing AIS350 with Axiom 9 - Garycar - 03-01-19 03:48 PM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)