Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11) Interfacing AIS350 with Axiom 9
03-01-19, 03:59 PM
Post: #4
RE: [CA11) Interfacing AIS350 with Axiom 9

Please refer to the components specified within the link previously provided for how to construct a simple backbone. A SeaTalkng Spur Cable (black w/white stripe; white plugs on each end) will be used to connected the AIS350 to a spur socket within the SeaTalkng 5-Way Connector listed within the previously referenced FAQ. As the MFD's NMEA 2000 plug features a DeviceNet Micro-C (M) plug rather than a SeaTalkng Spur plug, any one of the following options may be used to interface the MFD's NMEA 2000 Plug to a spur socket within the aforementioned SeaTalkng 5-Way Connector:
- A06045 / 15.7in (0.4m) SeaTalkng Spur to DeviceNet (F)
- A06075 / 39.4in (1.0m) SeaTalkng Spur to DeviceNet (F)
- A06082 DeviceNet (F) to SeaTalkng (M) Adapter and an appropriate length of SeaTalkng Spur Cable.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
RE: [CA11) Interfacing AIS350 with Axiom 9 - Chuck - Raymarine - Moderator - 03-01-19 03:59 PM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)