Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] Heading output data from st4000 mood ll
03-05-19, 07:09 PM (This post was last modified: 03-06-19 06:23 AM by Louise - Raymarine - Moderator.)
Post: #1
[LW11] Heading output data from st4000 mood ll
My Zeus 3 mfd requires heading input from my st4000 mk ll to calculate true wind direction from the st 60+ wind inst. Howcan I get the data from the autopilot to the mfd?
Find all posts by this user
Quote this message in a reply
03-06-19, 07:20 AM
Post: #2
RE: [LW11] Heading output data from st4000 mood ll
Dear Julius,

Thank you for your query.

You will need to convert the seatalk 1 data to either NMEA0183 or NMEA2000. As your MFD has NMEA2000 abilities, my suggestion is to purchase our ST1 to STng convertor E22158 (this will output NMEA2000 data) and connect it to your MFD or NMEA2000 backbone depending on your installation.

You can find out further information about the E22158 here

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)