Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Can I use a Thru Hull transducer with ths DS500x?
03-06-19, 10:07 PM (This post was last modified: 03-07-19 03:30 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Can I use a Thru Hull transducer with ths DS500x?
Hi there, I have purchased a second-hand Raymarine DS500X unit with transom mount transducer. Can this unit work with a thru hull transducer? My launch has a thru hull Aymar plastic S200 installed which worked with a Humminbird unit, but the transducer does not seem to work anymore.
Could I retrofit a recent Aymar tranducer in the fitting and connect to my DS500X?
Find all posts by this user
Quote this message in a reply
03-07-19, 03:34 PM
Post: #2
RE: [CA11] Can I use a Thru Hull transducer with ths DS500x?
SebinNZ,

It is certainly possible to use the DS500X with a compatible fishfinder transducer. However, Humminbird transducers would not be compatible / supported for use with the DS400X/500X/600X Fishfinders. The Raymarine's cx7 MFDs, the DS400X/500X/600X Fishfinders may be used with the fishfinder transducers found here.
Visit this user's website Find all posts by this user
Quote this message in a reply
03-07-19, 08:14 PM
Post: #3
RE: [CA11] Can I use a Thru Hull transducer with ths DS500x?
Ok, will look into these options. Thank you!
Find all posts by this user
Quote this message in a reply
03-08-19, 07:25 AM
Post: #4
RE: [CA11] Can I use a Thru Hull transducer with ths DS500x?
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)