Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] SeaTalk Converter vs Connector
08-01-19, 10:20 AM
Post: #11
RE: [LW11] SeaTalk Converter vs Connector
Thank you for your response. One additional question on this. As noted above, my Raystar 125 is interfaced with the E 120 Classic Data Master via its' nmea 0183 port. Is it also necessary to feed the Raystar 125 output to the nmea input on the ST5000+? I'm guessing not.
Find all posts by this user
Quote this message in a reply
08-12-19, 02:41 AM
Post: #12
RE: [LW11] SeaTalk Converter vs Connector
Dear Tizor,

Many thanks for your post.

Is the ST5000 networked to your E-classic over seatalk 1? The GPS only requires connecting to the E-classic, not to both the E-classic and the ST5000. As long as the ST5000 is networked to the E-classic, the E-classic will send the GPS data out over the network.

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)