Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] St5000+ Heading alignment
03-14-19, 10:59 PM (This post was last modified: 03-15-19 09:29 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] St5000+ Heading alignment
My 5000+ was working effectively holding course but I noticed a difference in the heading alignment compared to my compass. I decided to recalibrate. I ended up with a deviation correction of 4deg but have issues with heading alignment

When I completed the alignment process the heading entered remains ‘frozen’ on the display. No matter whay heading I am on the display heading remains constant. Obviously the auto pilot does not hold course inder these conditions

Any help would be greatly appreciated
Find all posts by this user
Quote this message in a reply
03-15-19, 09:31 AM
Post: #2
RE: [CA11] St5000+ Heading alignment
Welcome to the Raymarine Forum Geoff,

I suspect that there may be an issue with the autopilot's fluxgate compass. Please click here to view a FAQ addressing how to test the autopilot's fluxgate compass.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 

Forum Jump:

User(s) browsing this thread: 1 Guest(s)