The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] How to connect a NMEA output from a VHF to seatalk network?
03-23-19, 10:53 AM (This post was last modified: 03-25-19 01:29 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] How to connect a NMEA output from a VHF to seatalk network?
I purchased a standard horizon gx2200 with AIS, that uses the NMEA 0183 protocol. It has the wires, I want to connect this to my seatalk hs5 network switch.

Would one of these work? If so whic one?

http://www.raymarine.com/view/index.cfm?...4&col=4527

Thanks!!!!!


More info if it helps.....


The GX2200 uses NMEA 0183 protocol to share coordinates, DSC and AIS information to and from a GPS chart plotter. The GX2200 transfers AIS infor- mation to a GPS chart plotter or PC at 38400 baud (sometimes called HS). GPS and DSC information is transferred between a GPS chart plotter with multiple ports (minimum 2) at 4800 baud (default setting).
To connect to a GPS chart plotter which has one NMEA
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] How to connect a NMEA output from a VHF to seatalk network? - Wstandis - 03-23-19 10:53 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)