Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] eS78/Lighthouse II
03-25-19, 04:45 PM (This post was last modified: 03-26-19 09:56 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] eS78/Lighthouse II
Thanks to all for the questions and the mod's for the knowledge and the answers here in this forum. I am a 1st time MFD owner it came with a CPT100DVS. My question concerns the Setup>External Devices> Transducers Setup. Should I expect to see the directly connected CPT100DVS there, or is "External Devices" referring to networked transducers?
Seems to me that the software should enable this MFD to display the fact that there is a directly connected transom mounted transducer?
-Sorry for the newbie question.

Thanks,
George Mason
Find all posts by this user
Quote this message in a reply
03-26-19, 10:07 AM
Post: #2
RE: [CA11] eS78/Lighthouse II
Welcome to the Raymarine Forum George,

Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
03-26-19, 11:30 AM (This post was last modified: 11-13-19 03:43 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] eS78/Lighthouse II
Thanks,

Nice move with the FAQ.

Not to nitpick the comprehensive almost exhaustive, 428 page manual on Lighthouse II V19, but the sentence highlighted in the attached pic, should be expounded on. Everywhere else in the manual the user is told to select the transducer - leading to the confusion. Your answer clears it up.

V/R,
George


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
03-26-19, 12:24 PM
Post: #4
RE: [CA11] eS78/Lighthouse II
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)