Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Adding Sonar Charts to MFD C140W
03-27-19, 12:56 PM (This post was last modified: 03-27-19 12:58 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Adding Sonar Charts to MFD C140W
I was able to add sonar charts to my new CF card but can't seem to figure out how to make it display on my plotter. Any help?
Thanks.
Find all posts by this user
Quote this message in a reply
03-27-19, 01:09 PM
Post: #2
RE: [CA11] Adding Sonar Charts to MFD C140W
Welcome to the Raymarine Forum tyed,

When operating with the final C-Series Widescreen MFD software update (v2.35), the command sequence PRESENTATION->CHART LAYERS->CHART TYPE->FISH executed within the Chart application will cause the MFD to display Navionics SonarCharts cartography stored on the Navionics chart card.
Find all posts by this user
Quote this message in a reply
03-28-19, 02:27 PM (This post was last modified: 03-28-19 03:39 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] Adding Sonar Charts to MFD C140W
Thanks
Find all posts by this user
Quote this message in a reply
03-28-19, 04:04 PM
Post: #4
RE: [CA11] Adding Sonar Charts to MFD C140W
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)