Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] pilot control computer without sensor
03-27-19, 06:26 PM (This post was last modified: 03-29-19 08:21 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] pilot control computer without sensor
i have an older es pilot. i have all newer electronics. i want to update my pilot to an ev 100 controller. is the ev sensor mandatory to operate? i have es128 mfds
Find all posts by this user
Quote this message in a reply
03-29-19, 08:51 AM
Post: #2
RE: [CA11] pilot control computer without sensor
Welcome to the Raymarine Forum Jon,

Please note that Raymarine has not produced a product known as an eS autopilot. All Raymarine Evolution autopilots feature an EV-1 or EV-2 CCU, an ACU designed to support the type of drive unit which is presently installed on the vessel, and may optionally (but strongly recommended) feature an p70S/p70RS autopilot control head. If your system is presently interfaced to an Evolution autopilot or to a SPX autopilot, the autopilot's components will be listed within the MFD's Select Devices list.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)