The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] Integration eS75 to Seatalk1-Network
04-01-19, 12:24 AM (This post was last modified: 04-01-19 02:46 AM by Louise - Raymarine - Moderator.)
Post: #1
[LW11] Integration eS75 to Seatalk1-Network
We would like to replace our C70 MFD with an eS75.
Currently the ST6001, ST60 Wind and ST60 Tridata and the Course Computer are daisy chained and the C70 is connected with a Seatalk1 junction. For illustration of the current setup see the attached wiring scheme.

I've read the posts on "Replacing a C-Series Classic MFD(s) with an a/c/e/eS/gS-Series MFD(s)" and "Interfacing products having a SeaTalk interface to SeaTalkng / NMEA 2000" in this forum but I am still not sure which is the least costly way to replace the C70.

First, the AIS 250 could be connected with the R70414 Video/NMEA-Cable, this is clear. Could I connect the eS-Display directly to the Seatalk-Junction with the appropriate adapter cable (e.g. A06047) or is the connection with the SeatalkNG-Seatalk1-Adapter-Kit (E221589) mandatory?

Thank you in advance.

Kind regards
Ralf


Attached File(s)
.pdf  Nawal Schaltpläne 2018-07-15 (dragged).pdf (Size: 250.39 KB / Downloads: 237)
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[LW11] Integration eS75 to Seatalk1-Network - Planke - 04-01-19 12:24 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)