Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Interfacing RL70C plus hsb2 2002 system to NMEA0183 GPS receiver
04-19-19, 03:27 PM (This post was last modified: 04-23-19 10:07 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Interfacing RL70C plus hsb2 2002 system to NMEA0183 GPS receiver
I have a 120 Raymarine GPS connected to a 2002 Raymarine system including a RL70c plus hsb2 chartplotter, 150 course computer, fluxgate compass, RC 530 radar display, and Raymarine auto pilot. I want to remove the 120 GPS and replace it with a NMEA0183 GPS receiver. Any help with a wiring diagram or suggestions would be helpful.

Thanks in advance,

George Miller
Find all posts by this user
Quote this message in a reply
04-23-19, 10:14 AM (This post was last modified: 04-23-19 10:15 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Interfacing RL70C plus hsb2 2002 system to NMEA0183 GPS receiver
Welcome to the Raymarine Forum George,

When interfacing a third party GPS sensor supporting 4800 BAUD NMEA 0183 v2.1 or greater communications protocol to a hsb/hsb2/SL Pathfinder Series Chartplotter, Radar, or Fishfinder display,
- connect the NMEA 0183 IN1+ (green) lead of the display's Power/NMEA 0183 Input Cable to the GPS sensor's NMEA 0183 OUT+ lead
- connect the NMEA 0183 IN1- (blue) lead of the display's Power/NMEA 0183 Input Cable to the GPS sensor's NMEA 0183 OUT- lead
- connect the NMEA 0183 GPS sensor's power and ground leads to a switched power circuit and to ground as directed by the GPS sensor's manufacturer.

Alternatively, please click here to view a FAQ addressing how a Raystar 150 GPS Sensor may be interfaced to a hsb/hsb2/SL Pathfinder Series Chartplotter, Radar, or Fishfinder display.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)