Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] Ev1 sensor core Cable
04-22-19, 06:31 PM (This post was last modified: 04-23-19 10:55 AM by Derek - Raymarine - Moderator.)
Post: #1
[DG11] Ev1 sensor core Cable
Can I use blue backbone cable going from 5 way block to the t piece then connect white spur cable from the piece to ev1 sensor core? Or do I have to run spur cable from 5 way block to ev1 sensor core?
Find all posts by this user
Quote this message in a reply
04-23-19, 10:57 AM
Post: #2
RE: [DG11] Ev1 sensor core Cable
Hi HotDog7
Thank you for your enquiry.

The suggestion you have made is correct, remove the blue terminator from the 5 way block, plug a new backbone cable in to that blue socket and then use a T piece at the end, refit the blue terminator into the empty blue socket in the T piece and then use a spur cable to the EV1.

Thanks
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)