Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] M260 Tranducer

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] M260 Tranducer
04-24-19, 12:28 PM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] M260 Tranducer
RKW68,

If seeking to continue driving the M260 (I have one on my own boat ... great transducer!) at 1kW for deep water operation, then it would be recommended that the DSM250 be replaced with a CP370 which would in turn be interfaced to the HS5 RayNet Network Switch. However, if you will be satisfied with driving the M260 at 600W, then the M260 may be adapted (part #E66066) to be mated to the TRANSDUCER socket of the eS127 MFD.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] M260 Tranducer - RKW68 - 04-24-19, 05:59 AM
RE: [CA11] M260 Tranducer - RKW68 - 04-24-19, 11:58 AM
RE: [CA11] M260 Tranducer - Chuck - Raymarine - Moderator - 04-24-19 12:28 PM
RE: [CA11] M260 Tranducer - RKW68 - 04-24-19, 12:47 PM
RE: [CA11] M260 Tranducer - striperstan - 04-24-19, 08:48 PM
RE: [CA11] M260 Tranducer - RKW68 - 04-25-19, 06:21 AM
RE: [CA11] M260 Tranducer - RKW68 - 04-25-19, 11:51 AM
RE: [CA11] M260 Tranducer - striperstan - 04-26-19, 04:32 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication