Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Upgrade failure es128 Lighthouse 3 v3.9.46

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Upgrade failure es128 Lighthouse 3 v3.9.46
09-12-19, 11:04 PM
Post: #6
ChilliHeat Offline
Junior Member
**
 		Posts: 11
Joined: May 2018
Reputation: 0
RE: [CA11] Upgrade failure es128 Lighthouse 3 v3.9.46
Sorry this has taken so long to follow up, but we have undergone a refit and spent quite a while at sea.

I have upgraded to 3.10.42. I noted with the previous version as well as this one that Navionics works fine - it just takes its time :)

If I boot the MFD (eS128) and select chart I wait 90 secs (exactly - every time) and all is fine. Just don’t touch any other buttons.

So its not a gremlin - just a chance for a cup of coffee!
Cheers
Steve Campbell
Chilli Heat
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Upgrade failure es128 Lighthouse 3 v3.9.46 - ChilliHeat - 09-12-19 11:04 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication