Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
AIS-500 Vessel Name Chg
04-14-19, 09:51 AM
Post: #1
AIS-500 Vessel Name Chg
Hi, I have a vessel in my care that has an AIS-500 transceiver, the vessel's name has changed and therefore, I need to update the name. I presume the interface to do this is RS-232 and using the proAIS2 shareware program. The legacy install manual notes the existence of the comm port but not the wires specifically for that port. What are they?
Find all posts by this user
Quote this message in a reply
04-17-19, 03:55 PM
Post: #2
RE: AIS-500 Vessel Name Chg
lotharjt,

Q. I presume the interface to do this is RS-232 and using the proAIS2 shareware program.
A. While you are correct that the AIS500's DB9 plug would be used to interface the AIS500 to a PC to program static data such as the vessel's name, the dealer version of the ProAIS software (not ProAIS2 software) which accessible to Raymarine dealers via Raymarine's Portal would be used to change this data within the AIS500.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)