The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Waypoints erased
05-02-19, 03:17 PM (This post was last modified: 05-02-19 03:19 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Waypoints erased
Before I go further, yes, I had a backup and was able to successfully load them back on my unit(s).

I have 2 a-series units (a127 and a128). I was away from the boat for a while.....long story, lots of work done on it and life in general.....

However, when I returned, i powered up the two units and all of my waypoints were gone. Over 2000 of them. The only thing I can think of is that I changed the batteries and they somehow went through a factory reset? I did change chart cards to a newer Navionics card, but that shouldn't matter.

Any ideas? I don't want to be surprised like that again, if possible.

Thanks, Brad
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Waypoints erased - bpyoung - 05-02-19 03:17 PM
RE: [CA11] Waypoints erased - bpyoung - 05-02-19, 03:40 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)