Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] LH3.9 upgrade no sailing settings
05-04-19, 12:17 PM (This post was last modified: 05-10-19 12:21 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] LH3.9 upgrade no sailing settings
I just updated my Axiom Pro to LH3.9 (from 3.8) and do not see the new sailing settings under Settings->Boat Details. My boat type is Sail Cruiser. I tried setting to Powerboat then back to Sail Cruiser but no change.

Any suggestions?
Find all posts by this user
Quote this message in a reply
05-10-19, 12:25 PM
Post: #2
RE: [CA11] LH3.9 upgrade no sailing settings
Welcome to the Raymarine Forum Steve,

It is recommended that your system's waypoints, routes, and tracks be exported to a microSD memory card, that Factory Reset (HOME->SETTINGS->THIS DISPLAY->FACTORY RESET) be commanded to address this issue. Setting the boat type to one of the sailing boat types listed should then permit a Laylines tab to be displayed within the Chart application's settings (MENU->SETTINGS).
Visit this user's website Find all posts by this user
Quote this message in a reply
05-15-19, 07:55 AM
Post: #3
RE: [CA11] LH3.9 upgrade no sailing settings
This worked, thanks.
Find all posts by this user
Quote this message in a reply
05-15-19, 07:57 AM
Post: #4
RE: [CA11] LH3.9 upgrade no sailing settings
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)