Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] eS127 with LH3.9 not seeing DST800
06-27-19, 09:05 AM
Post: #8
RE: [CA11] eS127 with LH3.9 not seeing DST800
Colin,

The symptom reported within your latest response is indicative of a failed temperature thermistor within the DST800's removable depth/speed/temp insert. Temperature adjustment is limited to +/-9.9 degrees. It is recommended that the DST800's insert be removed and sent to Raymarine’s Product Repair Center to be bench checked / replaced if still under warranty. If not, then it would be recommended that the DST800's insert be replaced. Those seeking replacement transducer parts these instrument transducers are recommended to contact Gemeco, Inc. (Airmar’s US distributor (803 693 0777)).
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] eS127 with LH3.9 not seeing DST800 - Chuck - Raymarine - Moderator - 06-27-19 09:05 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)