Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] copying routes/waypoints from Axion Pro to a97
05-09-19, 06:09 AM (This post was last modified: 05-09-19 04:15 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] copying routes/waypoints from Axion Pro to a97
I have recently installed an Axiom Pro 9 system and have been busy creating routes and waypoints.

A boating buddy has an a97 system that he has not created any routes on.

Can I simply backup my routes and waypoints and restore them on his system to get him started?

Thank you
Find all posts by this user
Quote this message in a reply
05-09-19, 04:22 PM
Post: #2
RE: [CA11] copying routes/waypoints from Axion Pro to a97
Welcome to the Raymarine Forum morowsky,

If running LightHouse 3 v3.8.105 in your MFD and LightHouse II v19.06 in the a-Series MFD, then it task should be as simple as exporting the data from your MFD to a microSD memory card, placing that microSD memory card into the a-Series MFD, and then commanding the a-Series MFD to import the waypoints and routes stored on the microSD memory card. If the Axiom Pro MFD is running LightHouse 3 v3.9.46, then you will want to verify that none of the waypoint names or route names longer than 16 characters. Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
05-10-19, 10:52 AM
Post: #3
RE: [CA11] copying routes/waypoints from Axion Pro to a97
Thank you for the guidance.

Steve
Find all posts by this user
Quote this message in a reply
05-10-19, 12:50 PM
Post: #4
RE: [CA11] copying routes/waypoints from Axion Pro to a97
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)