Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] SG1 Autopilot with ST70 control head
05-14-19, 03:39 PM (This post was last modified: 05-14-19 03:40 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] SG1 Autopilot with ST70 control head
Welcome to the Raymarine Forum Colemj,

Q. Can the ST70 be used with the SG1 AP?
A. Yes. The ST70 autopilot control head featured communications circuitry which would support either SeaTalkng communications or SeaTalk communications, but not both simultaneously. A SeaTalk to SeaTalkng Converter Kit would not be used for interfacing the ST70 to the S1G. Instead, the ST70 control head would need to be interfaced to the SeaTalk bus rather than to a SeaTalkng backbone via an A06073 / 39.4in (1.0m) SeaTalkng to SeaTalk Adapter Cable. This cable features a press fit 3-pin plug permitting it to be plugged into a D244 SeaTalk Junction Block or into an unoccupied SeaTalk socket within the ST6002 or ST60 instrument.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] SG1 Autopilot with ST70 control head - Chuck - Raymarine - Moderator - 05-14-19 03:39 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)