Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Power cable for Quantum
06-03-19, 10:43 AM (This post was last modified: 06-03-19 10:44 AM by Chuck - Raymarine - Moderator.)
Post: #17
RE: [CA11] Power cable for Quantum
Welcome to the Raymarine Forum Pete,

Q1. From reading more this sounds better, right?
- A80308 at the radome (on an arch on a powerboat).
- A80227 data and power cable.
A1. Your suggestion is consistent with my recommendation.

Q2. The A80227 plugs into my A98 plus also goes to switched power source. How much can I split apart the cable at that end -- because the A98 and my switched power block are 2-3' apart?
A2. The power/drain leads of the Digital Radar Cable will need to be extended using marine grade cable / wire of the similar gauge.

Q3. I need about 6 meters of cable (natch). I don't have a lot of space for coiling up excess. Is there any performance hit if I add an A92141D extension vs. going with a 10 meter cable?
A3. Negative.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Power cable for Quantum - olegreg - 05-17-16, 10:10 AM
RE: Power cable for Quantum - psubill78 - 05-18-16, 05:24 PM
RE: Power cable for Quantum - psubill78 - 05-19-16, 08:21 AM
RE: Power cable for Quantum - psubill78 - 05-19-16, 11:30 AM
RE: Power cable for Quantum - Lazybones - 10-28-16, 11:41 AM
RE: [CA11] Power cable for Quantum - Chuck - Raymarine - Moderator - 06-03-19 10:43 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)