[CA] [CA11] Power cable for Quantum

[Chuck - Raymarine - Moderator]

Lazybones,

If considering a wired communications link between a Quantum Radome and a Raymarine system, then it is generally recommended that an appropriate length of Digital Radar Cable w/RayNet (F) connector on one end be installed within the mast to permit a single cable to be chased though the mast. An A80308 Quantum Adapter Cable may be used adapt a Digital Radar Cable for use with the Quantum Radome. All of this said, in sailing vessels, it is generally recommended that an appropriate length of Digital Radar Extension Cable be chased from the radome to the base of the mast, pole mount or backstay. This will permit the Digital Radar Extension Cable to be quickly and cleanly disconnected from the vessel's wiring should the mast, pole mount, backstay mount, etc. be removed. The Digital Radar Extension Cable will be connected to an appropriate length of Digital Radar Cable w/RayNet (F) plug. The aforementioned adapter is also designed for use with Digital Radar Extension Cables. The Digital Radar Cable will in turn be interfaced to the power and to the HS5 RayNet Network Switch.