Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] E120 Classic REBOOTING

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] E120 Classic REBOOTING
05-16-19, 09:57 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] E120 Classic REBOOTING
Welcome to the Raymarine Forum Mike,

It is recommended that you verify that the MFD has been updated with the final E-Series Classic MFD software update (v5.69) and if not, that its software be updated accordingly. Should the MFD have been updated and should the reported issue persist, then it is recommended that a Factory Reset be commanded. Please click here to view a FAQ addressing this subject. The MFD should then be tested without a chart card in its reader to verify the operational state of the MFD.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] E120 Classic REBOOTING - Chuck - Raymarine - Moderator - 05-16-19 09:57 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication