Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] Procedure to download boat polars on Axiom displays
05-22-19, 02:39 PM (This post was last modified: 05-24-19 04:01 AM by Louise - Raymarine - Moderator.)
Post: #1
[LW11] Procedure to download boat polars on Axiom displays
Hi,

Now that Lignthouse 3 v 3.9 finally includes laylines and sailing data, what is the good procedure to dowload the boat polars in the Axiom, what data format to use, ect ect....
It is not very clear in the latest Lighthouse 3 manual.
I have the polars for my boat and I can format the data anyway which would be accepted by the Axiom but I need your help to know how exactly to format the data I have.

Thanks in advance for your reply

Serge
Find all posts by this user
Quote this message in a reply
05-28-19, 10:45 AM
Post: #2
RE: [LW11] Procedure to download boat polars on Axiom displays
Dear estrace,

There are now a large selection of preset polars available in the boat details page. You need to ensure the boat is setup for sailing HOME>SETTINGS>BOAT DETAILS>POLAR

If your polar is not in the list, please email the details to polars@raymarine.com and we will add them in our next software release.

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)