[TG] [TG11] AIS 650 stops displaying targets

[timgoodyear]

Hi Tom,

I have the AIS unit exposed now, with a second VHF antenna handy to swap as a test, and the SeatalkNG and NMEA0183 connections available. I will check lights etc on our next passage.

I will record the AIS traffic on the es127. Is there any point in recording the ProAIS2 serial data if I leave that connected?

ProAIS2 is saying the AIS power supply voltage is 13.5V when at the dock; the battery charger shows 13.5V, the battery monitor 13.48V, with the rest of the instruments on (but not the Autopilot that's on a separate breaker). SWR is reported at 1.7.

The PC is operating on battery when we're offshore - I will check the RF Ground on the VHF.

Thanks for the pointers - I will let you know what we see.

Regards,

Tim