Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Linking c80 to i70
05-31-19, 12:26 AM (This post was last modified: 06-03-19 04:35 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Linking c80 to i70
I an trying to link my C80 to my new i70 with wind, depth and speed. I have a itc-5 and a seatalk - STng converter. Is this possible ?
Find all posts by this user
Quote this message in a reply
06-03-19, 04:41 PM
Post: #2
RE: [CA11] Linking c80 to i70
Welcome to the Raymarine Forum Trevorbirtwistle,

Raymarine offer the SeaTalk to SeaTalkng Converter Kit for such purposes. The included SeaTalk to SeaTalkng Converter will be added as a backbone component to the currently installed SeaTalkng / NMEA 2000 backbone linking the i70 to the iTC-5. The supplied SeaTalk to SeaTalkng Adapter Cable will be connected to SeaTalk (yellow) socket of the SeaTalk to SeaTalkng Converter and its other end will be used to interface the unpowered SeaTalk bus (C80 MFD, GPS, etc.) to the SeaTalk to the SeaTalk to SeaTalkng Converter.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)