Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] Axiom Pro s to Volvo Penta D6
05-19-19, 11:54 PM (This post was last modified: 05-23-19 10:26 AM by Chuck - Raymarine - Moderator.)
Post: #1
[DG11] Axiom Pro s to Volvo Penta D6
I have a Volvo Penta D6 that earlier was connected to a C120 via VP gatway 3889757. I switch to old c120 to a Axiom 12 Pro S and connected at same point as before. End of backbone. Axiom unit will not find the engine. Tried to terminate and use another t-pice. No result Axiom cannot identify. Can it be the gateway that is to old? It´s probably from 2008 Br / Marten
Find all posts by this user
Quote this message in a reply
05-31-19, 09:56 AM
Post: #2
RE: [DG11] Axiom Pro s to Volvo Penta D6
Dear MIo,

Thank you for the post.

It will be worth consulting a Volvo dealer regarding the gateway as it is likely to be out of date. Can you also send a system installation diagram to us to assist with helping you diagnose the issue.

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)