[CA11] Installing ng Network with Existing Instruments

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Installing ng Network with Existing Instruments

05-30-19, 03:17 PM

Post: #2

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: [CA11] Installing ng Network with Existing Instruments

Welcome to the Raymarine Forum Mark,

The ST60 instruments may not be interfaced to the system in the manner shown within your diagram. Instead, a SeaTalk to SeaTalkng Converter will need to be added to the backbone or may simply replace the SeaTalkng 5-Way Connector shown within your diagram. The SeaTalk to SeaTalkng Adapter Cable supplied with the SeaTalk to SeaTalkng Converter Kit will be used to interface the ST60 Instruments to the SeaTalk (yellow) socket of the SeaTalk to SeaTalkng Converter.

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Installing ng Network with Existing Instruments - markgadson - 05-29-19, 08:00 AM

RE: [CA11] Installing ng Network with Existing Instruments - Chuck - Raymarine - Moderator - 05-30-19 03:17 PM

RE: [CA11] Installing ng Network with Existing Instruments - markgadson - 05-30-19, 07:08 PM

RE: [CA11] Installing ng Network with Existing Instruments - Chuck - Raymarine - Moderator - 06-03-19, 10:12 AM

RE: [CA11] Installing ng Network with Existing Instruments - markgadson - 06-03-19, 10:40 AM

RE: [CA11] Installing ng Network with Existing Instruments - Chuck - Raymarine - Moderator - 06-03-19, 11:02 AM

RE: [CA11] Installing ng Network with Existing Instruments - markgadson - 06-03-19, 11:18 AM

User(s) browsing this thread: 1 Guest(s)